The Maglite XL100 features "Advanced Flashlight User Interface" that allows you to easily adjust the brightness or strobe rate by rotating your wrist right or left while holding the XL100 flashlight. With its convenient memory function, the next time you turn on the XL100 it will automatically use the level you have previously selected.
Features of Maglite XL100 LED Flashlight:
• Advanced Flashlight User Interface - rotate wrist to adjust brightness and strobe
• 83 lumens in high, 4484cd
• shines for up to 134 meters
• adjustable brightness with memory
• runs for 5 hours and 15 minutes in high and up to 201 hours in low
• powered by 3 ea AAA alkaline batteries, included
• modes:
Normal, basic on and off
Strobe
Nite Lite
Signal
SOS
• recessed pushbutton tail switch for constant on/off (no momentary on)
• lockout mode prevents accidental activation
• water and shock resistant
• rugged machined aluminum construction
• anodized inside and out for advanced corrosion resistance
• measures 4.8" long with a 1" diameter
• weighs 3.7 oz with batteries
• limited lifetime warranty through Maglite
• made in USA
Operation of the MagLite XL100 LED Flashlight:
• press and release the tail switch for constant on, press again for off
• to select a mode, hold the flashlight horizontal to the ground with the icon of the desired mode
at 12 o'clock, press and hold the switch for longer than 1 second
• brightness of the XL100 can be adjusted by continuing to press the tailcap while
rotating your wrist right or left; release at desired level
• blink rate of the XL100 can be changed by selected the "Strobe" mode icon, hold the tail switch
and rotate your wrist right or left; release at desired level
• Nite Lite - select Nite Lite mode icon, press and hold switch until the XL100 blinks once, then
set XL100 flashlight at desired stationary location and the light will automatically dim to a low brightness setting;
if the flashlight is moved, it will return to full power
• Lockout - this feature will prevent accidental activation; to engage, aim the XL100 to the ceiling,
then press and hold the switch while rotating the flashlight downward and aiming the light
to the floor, release the switch, it is now in lockout mode; repeat steps to disengage lockout
Read Customer Reviews..