TeraLux MiniStar 30 TLE-300M LED replacement module for Maglite® 4D, 5D and 6 D-cell flashlights gives you over 500 lumens of white light.

To install the TerraLux MiniStar 30 TLE-300M LED module into your flashlight -
1. Remove the front bezel of the flashlight containing the plastic lens by turning counter-clockwise and set aside. Remove the reflector, bulb retaining ring and the incandescent bulb. You will not need the reflector, bulb or its retaning ring, but may wish to keep them for future use.

2. Screw the open head of the flashlight al the way down by rotating it clockwise, stopping when the flashlight head is at the end of its travel.

3. Screw the TLE-300M into the open bulb socket by turning clockwise. Screw the unit all the way down. Next, raise the head by turning it counter-clockwise until you feel it hit the underside of the TLE-300. The MiniStar 30 TLE-300 will turn slightly indicating it has made contact. It is important the underside of the MiniStar 30 TLE-300 makes contact with the head. Replace the O-ring in the front bezel with the unit supplied. Then, replace the front lens and screw onto head of flashlight.

Features of TerraLux MiniStar 30 TLE-300M LED module:
• more than 500 lumens of light output
• replaces halogen bulb with long life LEDs
• electronic regulation for constant light output
• can be used with alkaline, NiCad, MiMH or rechargeable Li-ion batteries
• efficient TIR optics
• reverse polarity protection
• limited warranty from TerraLux
• made in USA

Dimensions	n/a
Lamp Type	3 LEDs
Light Output	500 lumens
Run Time	not rated
Focus Type	wide
Origin	made in USA